Cutting a Whole Chicken or Pheasant

Comment

As an Amazon Associate I earn from qualifying purchases.

Cutting a whole chicken, pheasant, grouse or turkey is exactly the same process — they are all related, gallinaceous birds, after all. I’ll walk you through how to cut up a chicken or grouse for cooking step by step so you can make the best use of all the parts. 

The end result of cutting a chicken into its parts, laid out on a table.
Photo by Holly A. Heyser

Cutting a whole chicken or game bird is a basic skill you will want to know. For buyers of poultry, buying a whole chicken or turkey is more economical — so if you can cut up a chicken by yourself, you will save a lot of money. And each part cooks a little differently, so you can make the best use of the wings, legs, breasts and carcass. 

This is especially true of upland game birds like pheasants, grouse and wild turkeys, Not every bird is worthy of a full-on roast: To me, such a bird needs to be fat, reasonably young and not terribly shot-up. For chickens, old birds like stewing hens are much better cut up than roasted whole. 

For upland game birds with broken legs, shot-up breasts, that are skinny or very old, I break them down into parts for separate cooking. Breasts get seared, while legs and wings go into their own kinds of recipes. The carcasses all go into stocks and broth. I waste very little. Here’s how I turn a whole game bird into parts:

I am using a blue grouse for these step by step illustrations, but remember that cutting a whole chicken is exactly the same. 

Also, this is just one method for cutting up a whole chicken or pheasant. There are many others, depending on how you plan on cooking them. 

A knife, shears and a whole grouse, ready for cutting.
Photo by Holly A. Heyser

Cutting a Whole Chicken, Pheasant or Grouse

Obviously, start with a while chicken, pheasant, grouse, turkey, partridge or quail. These last two are built the same as a chicken, but are small enough where few people bother to cut them into their component parts; Cornish game hens are similar. 

You will want a sharp paring or boning knife, and good poultry shears, I prefer shears with a bone notch that break into two pieces for easy cleaning. 

Side note for hunters: This process works for both skinless and plucked birds. 

Removing the Legs

Start with the legs. I press on the gap between legs and breast to push as much skin toward the thigh as I can. Slice down in the gap and you will notice you just sliced skin, not muscle — that’s the key. Gently cut downward until you reach the ball-and-socket joint where the leg is attached.

Starting cutting a whole chicken by removing the legs.
Photo by Holly A. Heyser

Snap the leg back toward you to pop open the ball-and-socket joint, which frees the leg/thigh.

Removing the leg on a grouse.
Photo by Holly A. Heyser

Tuck the knife behind the ball and cut the leg free. As you cut past the socket joint, don’t forget to arc the knife around the little pocket of meat known in birds as the “oyster,” as this is the best part. The oyster is small in grouse, but is large in turkeys, chicken and pheasants.

As you slice down, arc the knife under the back of the bird to get all the meat off the thigh.

If you want to separate thighs from drumsticks, bend the leg a few times to see exactly where the joint is. Place the blade at that spot and slice downward, and you should go right through cartilage, not bone. It takes a little practice to get this correct every time. 

Taking off the Wings

When cutting a whole chicken, you will usually want to remove all three digits of the wings, unless you are going to make airline breasts. In that case, you leave the drumette on. The three digits are the wing tip, the flat and the drumette. 

With upland game birds, many hunters snip off the whole wing. This is a shame, because the drumette is not only tasty and large in pheasants and turkeys, but leaving it on allows you to make those airline breasts, or it serves as protection for the breast if you are going to roast a whole bird. 

I happen to have several great recipes for pheasant wings and turkey wings, if you need a reason to keep them. 

Start by snipping off the wing tips, if they are there. Use them for stock or broth. Next, use shears to snip off the flats. There is a joint you can take advantage of so you just snip through cartilage. Bend the wing a few times so you can visualize it. 

Snipping off the flats of the wing of a grouse.
Photo by Holly A. Heyser

Now comes the hardest part of cutting a whole chicken, pheasant or grouse: Removing the drumette. The drumette is attached at a joint tight under the front of the breast. The easiest way to spot it is to put the bird on its back and move the drumette back and forth. Slice down there.

Cutting off the drumette of a grouse.
Photo by Holly A. Heyser

If you cut in the right spot, you will go right through the soft cartilage and free the wing from the body. Don’t worry if you mess it up a few times; it takes practice to know exactly where that spot is.

Now slide the knife along the saber bone, which is a long, curved bone along the bird’s back that looks like a sword; you can see it in the picture above left. Slide the knife along that bone until you get to the joint, which will now be totally free from the body. Finish by removing the wing by cutting a little extra skin from the neck area.

Do this on both sides. 

Breasting the Bird

There are a bunch of ways to breast out a chicken, pheasant or grouse. Some people lift up the whole breastbone and use shears to remove it at the wing joints. This is a nice method that preserves the skin on the breast — kinda sorta. 

But chickens, pheasants, turkeys and some grouse are built in such a way that the skin coverage isn’t great once you remove the legs. This is very different from ducks and geese. 

Pointing to the gap in skin coverage on a chicken, pheasant or grouse.
Photo by Holly A. Heyser

You’ll always have that gap where you removed the legs, so there will always be an area of the breast with no skin protection. So I pull off the skin. Yes, it seems like it’s defeating the point of cutting a whole chicken, pheasant or grouse, but I like to use that stray skin as either a chef’s treat or to make chicken or pheasant skin tacos. Simply cut the skin into pieces and fry them crispy. They’re amazing. 

Removing skin from a grouse breast.
Photo by Holly A. Heyser

After that, slide your knife down right alongside the keel bone until you hit the breast bone. Tap the point of the knife on the breast bone as you slice back towards the tail, then up to the wishbone. Closely follow the wishbone with your knife. 

The first cut towards removing the grouse breast.
Photo by Holly A. Heyser

Use you knife to carefully and gently free the breast from the bones. Always have the knife in contact with the bone so you don’t waste meat. If you mess up, all is not lost: Having some meat on the bones makes a better stock or broth later. 

Finishing the cuts on removing a grouse breast.
Photo by Holly A. Heyser

Don’t forget to remove the tender from inside the breast. On chickens it’s the same color as the breast. On many upland game birds, it’s lighter in color. You need to remove it because if you leave the tender on the breast when you cook it, it will curl up and cause that side of the breast to cook unevenly. 

I save tenders from my birds and when I have enough, I use them in their own dish, like fried tenders or in a stir fry; they are perfect in kung pao chicken

Removing the tender from the breast meat.
Photo by Holly A. Heyser

There you go. Now you’re done.

My advice: Take your time at first, study the pictures and feel free to ask me questions. Cutting a whole chicken, pheasant, turkey or grouse is not hard. Every bird will be easier than the last one you did, and with minor changes, this technique for cutting up a carcass works with any bird: ducks, geese, pigeons, you name it.

Once you get the hang of it, it only takes a few minutes to break down a bird.

You May Also Like

French Garlic Chicken

Classic French 40 clove garlic chicken, made with pheasant. This recipe features thighs, and works with chicken, pheasant, rabbit or partridge.

Wild Rice Salad

A fresh and bright wild rice salad recipe that mimics Crisp and Green’s “wild child” salad. I use grouse, wild rice and dried wild berries.

Spanish Quail with Paprika and Onions

A Spanish recipe for quail stewed with paprika and onions. You then strain off the liquid and serve that with pasta. it’s a great date night dish.

Green Chile Chicken Soup

A recipe for Southwestern style green chile chicken soup, with roasted green Hatch chiles, white beans, greens and a rich broth.

About Hank Shaw

Hey there. Welcome to Hunter Angler Gardener Cook, the internet’s largest source of recipes and know-how for wild foods. I am a chef, author, and yes, hunter, angler, gardener, forager and cook. Follow me on Instagram and on Facebook.

Leave a comment

Your email address will not be published. Required fields are marked *